The use of wet type peanut peeling machine
Wet peanut peeling machine is a professional equipment designed for peeling the skin of soaked peanuts. Through the advanced mechanical structure and working principle, this machine can effectively and quickly complete the peanut peeling operation to ensure that the peeled peanut kernels are white and remain intact, which is very suitable for processing all kinds of peanut food such as wine-flavoured peanuts, deep-fried peanuts, spicy peanuts and so on. It shows a wide range of application prospects in the field of peanut deep processing, and becomes the ideal choice for peanut peeling process.
1, Peanut peeling machine working principle
The working principle of wet peanut peeling machine is based on the mechanical peeling of materials under specific conditions. When working, the pre-soaked peanuts are poured into the inlet, and the peanuts are guided by vibration into the area of the rotating rubber wheels fixed by three power rollers. During this process, the induction strip works in tandem with the feed wheels to ensure that the peanuts are evenly distributed and enter the peeling area smoothly. The blades on the knife frame cut the peanut skins precisely, while the peeled peanuts are pressed into the discharge hopper by the action of the discharge wheels, and finally discharged through the discharge hopper. At the same time, the peanut skin is thrown out by the peeling wheel, realising the effective separation of skin and kernel.
2, Peanut peeling machine use method
To ensure the best performance of the wet peanut peeling machine and prolong the life of the equipment, please follow the following steps for proper use:
1) Installation and Preparation:
Install the machine on a level, hard and firm ground to ensure stability when the machine is running.
Equip with necessary water supply and drainage facilities to facilitate water treatment for soaking peanuts and machine cleaning.
2) Safety check:
Before use, carefully check whether the motor and its fasteners are firm and not loose to prevent safety hazards during operation.
Confirm that all fasteners are in a tight state.
3) Power debugging:
After connecting the power supply, carry out no-load debugging, observe whether the motor running direction is correct, to avoid equipment damage caused by motor reversal.
4）Lubrication maintenance:
Regularly check and replenish the lubricant to the specified position to ensure that all lubricated parts are fully lubricated to reduce wear and tear.
5）Power on and run:
After completing the above checks, turn on the power, start the machine, gradually add the soaked peanuts and start the peeling operation.
3, Precautions for using peanut peeling machine
Before operation, you should read the operation manual of the machine carefully to understand the structure and performance of the machine.
When the machine is running, the operator shall not leave his post and pay attention to the running status of the machine at any time.
Prohibit maintenance or cleaning work without cutting off the power supply.
Regularly check the wear and tear of the blades and replace them in time to ensure the peeling effect.
After use, the machine should be thoroughly cleaned to keep the interior clean to prevent residues from corroding the machine.
With its high efficiency and stable performance, the wet type peanut peeling machine has been widely used in the peanut deep processing industry. Whether it is to make high-quality peanut products or to improve production efficiency, this machine can provide reliable support and is an indispensable and important tool for peanut peeling process.