Peanut Peeling Machine Use and Maintenance Guide – Improve Efficiency and Extend Lifespan

Peanut peeling machine is a widely used equipment in peanut butter production and other peanut processing industries. It efficiently separates peanut skins from peanut kernels by rolling and peeling. To ensure optimal performance and prolong the service life of your peanut peeler, here are some key use and maintenance points.

Peanut peeling machine use and maintenance

1.Follow the instruction manual

Before using the peanut peeler, it is important to read and understand the operating instructions carefully. The manual contains basic operating procedures, safety precautions and maintenance recommendations to ensure that you can use the machine correctly and safely.

2.Monitor the machine’s operating status

During operation, always monitor the machine’s running status, including speed, sound and temperature. If you find any abnormality, stop the machine immediately for inspection. At the end of each day’s work, check whether the bearings are overheated and whether the bolts of each part are loose, and tighten them in time, especially the high-speed running parts.

3.Regular inspection and maintenance

Regularly check the bearings and other parts that need lubrication to ensure their normal operation. If wear or damage is found, the parts should be refueled or replaced in time. At the end of each processing season, carry out a comprehensive inspection, including the operation of bearings, whether there are deformations or cracks on the bottom of the screen, and the wear and tear of the screen. Repair damaged parts and remove dirt and residual peanuts from the machine.

4.Belt tension and clearance adjustment

Peanut peeler usually adopts triangle belt drive. After a period of time, the new belt will gradually elongate and loosen due to the tension. Therefore, regularly check the tension of the drive belt and the fit gap of each part to see if it is suitable, and adjust it in time when problems are found.

5.Long-term unused storage

If the peanut peeler is not used for a long time, the belt should be removed and stored on a backlit wall. Place the machine in a dry storage room to avoid moisture and dust.

6.Safe Operation

When operating the peanut peeler, make sure to follow the safety operation procedures. Ensure that all guards are intact and avoid making repairs or adjustments while the machine is in operation. The operator should wear proper protective equipment such as gloves and goggles.

7.Frequently Asked Questions and Solutions

Problem: The machine is running noisily
Solution: Check the bearings for wear or lack of lubrication, refuel or replace the bearings in time.

Problem: Poor peeling effect
Solution: Check whether the screen is clogged or worn, clean or replace the screen.

Problem: Machine overheating
Solution: check whether the motor and bearings are overloaded, reduce the workload appropriately or stop the machine to cool down.

The appearance and use of peanut peeling machine not only greatly liberates manpower, but also significantly improves production efficiency. Through standardized use and regular maintenance, it can ensure the long-term stable operation of the machine and extend its service life. Peanut peeling machine is an economical, convenient and easy-to-use equipment, which is worth to be widely promoted in peanut processing industry.