The use of dry peanut peeling machine

Peanut peeling machine, as a professional equipment for removing the red skin of peanuts, is widely used in the food processing industry, especially in the production of peanut butter, peanut protein milk powder, as well as canned peanuts and other products that play an important role in the previous peeling process. These machines are mainly divided into dry peanut peeling machine and wet peanut peeling machine according to the different processing methods. Peanuts treated with peanut peeling machine, white color, the surface will not appear browning, protein to maintain the original nature, while the peeling process of the skin and rice automatically separated, greatly improving the production efficiency, for food processing has brought great convenience.

The following is a brief introduction to the use of dry peanut peeling machine:

First, safety inspection and preparation

Before using the peanut peeling machine, it must be ensured that all fasteners have been tightened, the rotating part is flexible and unobstructed, the bearings have been filled with enough lubricating oil, and the peeling machine is placed in a smooth position to ensure the stability and safety of the machine when it is running. In addition, in order to protect the operator, the motor shell should be implemented to protect the grounding, to prevent electric shock accidents.

Second, test run and adjustment

Before energizing, it is recommended to manually rotate the peeling machine a few times to check whether there is any abnormal impact sound, if so, we need to find out the reason and solve the problem before energizing. According to the size of peanut kernel, choose the right screen to ensure the peeling effect. After energizing, carry out no-load test run first, observe whether the rotor steering is correct and consistent with the direction marked on the machine. After idling for a few minutes, make sure there is no abnormal noise and running smoothly before you start feeding.

Third, operation precautions

In the process of peeling, the peanut nuts should be fed evenly and in the right amount, avoiding mixing iron chips, stones and other debris to prevent damage to the peanut kernels or cause mechanical failure. When the sieve surface is covered full by peanut kernels, the exit switch can be opened only. If the peanut shells increase, it can be solved by adjusting the position of the motor, tensioning the fan belt and increasing the amount of blowing air.

Fourth, maintenance and maintenance

After use, the machine should be cleaned up the appearance of dust, dirt and internal residual seeds and other debris, clean the bearings in all parts with diesel fuel, and dry and coat with butter to prevent corrosion. Repaint the painted parts to protect the machine from rust and corrosion. Finally, cover the machine properly and place it in a dry warehouse for storage, while the belt needs to be removed and hung on the wall indoors where it is not exposed to the sun.

As a professional manufacturer of peanut machinery, we offer a full range of equipment including peanut roasting machine, peanut milling machine, peanut butter machine and peanut butter production line. If you have any needs or questions, please feel free to contact us, we will be happy to provide you with the best service and answers.